In-Wall Wire Concealment
Cables routed inside the wall so nothing hangs below the screen.
A mounted TV should look like it was designed into the room: level, at a comfortable height, anchored into the wall’s structure, with no cables hanging below it. That’s the standard we work to on every install across Denver, Aurora, Thornton, Northglenn, Westminster, Boulder, Brighton, and Fort Lupton.
The mount decides how the TV sits, where you can watch from, and how the finished wall looks. We’ll help you pick the right one for the room — or install the mount you already bought if it’s rated for your TV.
Holds the TV close to the wall for the slimmest, cleanest look. Best when the screen sits at eye level and faces your main seat.
Angles the screen down a few degrees. Useful for higher placements, like above a console, and for cutting glare from windows.
An articulating arm pulls the screen out and swivels it toward different seats. Ideal for open layouts, corners, and kitchens.
Bigger screens are heavier, wider, and less forgiving. Before a large TV goes up, we confirm that the mount’s weight and VESA ratings match the TV, locate framing across the full width of the bracket, and plan the lift so the screen is handled safely from the stand to the wall.
We also check the viewing distance and height for the room. A screen that’s right in a showroom can feel oversized when it’s hung too high in a living room.
Mounting over a fireplace is one of the most-requested installs — and one where the right answer depends on the room. Heat coming off the mantel, the height of the screen, and what the chimney wall is built from all matter.
We look at the surface, the heat exposure, and your seating before recommending it. When a fireplace install makes sense, we’ll talk through a tilting or pull-down mount to bring the screen closer to eye level. When another wall will serve you better, we’ll say so.
What’s behind the wall decides how a TV gets mounted. We identify the wall construction first and choose hardware to match, instead of reaching for whatever is in the kit.
We can mount your soundbar directly under the TV (on a bracket or to the wall), set up the connections, and hide the cables inside the wall so the install looks finished. See in-wall wire concealment for how that works.

Good to know: We don’t install new outlets, circuits, or other electrical wiring. If your plan needs new electrical work, we’ll let you know and can schedule the mount around your licensed electrician.
Answer a few quick questions about your TV, your wall, and where it’s going. It takes a couple of minutes and gives us what we need to quote accurately.
For most living rooms, the center of the screen lands close to seated eye level. The exact height depends on your seating, the screen size, and what’s below the TV. We’ll confirm the height with you before drilling.
Yes. We’ll check that it’s rated for your TV’s weight and VESA pattern and that it suits the wall. If it isn’t a safe match, we’ll tell you before anything goes on the wall.
Everything from small bedroom TVs to large living room and commercial displays. Let us know the screen size and model when you request a quote so we can plan for the weight and bracket.
Often, yes. We check the surface, the heat coming off the mantel, and the viewing height first, and we’ll recommend a different spot if the fireplace wall isn’t a good fit.
Yes. In-wall concealment runs low-voltage cables like HDMI inside the wall, so nothing hangs below the TV. On walls where in-wall routing isn’t practical, we can use a clean, paintable surface raceway.
It depends on the TV size, the mount type, the wall (drywall, brick, stone, or plaster), and whether you want the wires hidden. Send us the details or a photo of the wall and we’ll give you a free quote before any work is scheduled.
Yes. Brick and stone take masonry anchors and the right drill bits, and we plan the hole placement so the mount sits level and the wall looks clean. Stone fireplaces are one of the most common jobs we see.
For most TVs we anchor into studs, because that’s the safest option. If the studs aren’t where the TV needs to go, a mount with a wider rail can usually reach them. We’ll tell you what’s safe for your TV’s weight before we drill.
The mount has to match the VESA pattern (the hole spacing on the back of your TV) and be rated for its weight. If you’re not sure, send us your TV model and we’ll tell you which mounts fit.
A single TV is usually done in one visit. Extras like hiding wires, mounting over a fireplace, or adding a soundbar take longer — we’ll give you a time estimate with your quote.
Cables routed inside the wall so nothing hangs below the screen.
Screens, speakers, and projectors mounted and connected for the room you’re building.
Displays, whiteboards, fixtures, and wall-mounted equipment for offices and businesses.
We provide tv mounting throughout the metro area, including these cities.
All service areas