In-wall wire concealment in Denver

Cables dangling under a mounted TV undo the whole point of mounting it. We route your HDMI, optical, and other low-voltage cables inside the wall so the finished install looks clean from every angle.

How in-wall concealment works

We open a small, neat port behind the TV and another near your media console or outlet, then route the cables through the wall cavity between them. Recessed wall plates finish both openings so the cables enter and exit cleanly.

Before cutting, we check for framing, fire blocking, insulation, and anything else running through that section of wall, and plan the route around it.

When in-wall isn’t the right call

Some walls don’t allow an in-wall run — brick and stone, exterior walls packed with insulation, or a wall with blocking in the way. In those cases we can install a slim, paintable surface raceway that keeps cables straight and tidy against the wall.

What about power to the TV?

The TV still needs power. We’ll walk through code-compliant options for getting power to the screen. Adding a new outlet or circuit is electrical work, and we’ll refer that to a licensed electrician rather than do it ourselves.

What’s included

  • Wall check for framing, blocking, and obstructions
  • Clean cut-outs with recessed wall plates
  • Routing of HDMI, optical, speaker, and other low-voltage cables
  • Surface raceway option where in-wall routing isn’t practical
  • Cable dressing at the TV and media console

Good to know: We conceal low-voltage cables only. We don’t add or relocate outlets or run new electrical wiring.

In-Wall Wire Concealment: common questions

Can you conceal wires for a TV I already mounted?

Usually, yes. We may need to remove the TV from the bracket to open the wall behind it, then re-hang it once the cables are routed.

Can you hide wires on a brick or stone wall?

Running cables inside masonry usually isn’t practical. We’ll look at routing options around the wall or a clean surface raceway instead.

Will I see holes in the wall afterward?

The openings are finished with recessed wall plates designed for cable pass-through, so what you see is a small, tidy plate behind the TV and one near the console.

How much does it cost to hide TV wires in the wall?

It depends on the wall type, what’s inside the wall, and how far the cables need to travel. Tell us about your setup or send a photo and we’ll quote it with your TV mounting or on its own.

Can you hide TV wires without cutting into the wall?

Yes. If in-wall routing isn’t an option — on brick, stone, or a wall with obstructions — a slim on-wall cable cover painted to match keeps things neat. We’ll walk you through which fits your wall.

Is it safe to run a TV power cord inside the wall?

A standard TV power cord isn’t rated to run inside a wall. In-wall setups use components made for that purpose. We don’t do electrical work — if you need a new outlet behind the TV, a licensed electrician handles that part.

Related services

TV Mounting

Flat, tilt, and full-motion mounts, set at the right height and anchored into structure.

Home Theater Installation

Screens, speakers, and projectors mounted and connected for the room you’re building.